Tel: 01643 707204 Email: info@wynnoil.co.uk
Aircomatic® II Complete cleaning concept for all air-conditioning systems. Consists of the liquid Wynn´s Airco-Clean® Ultrasonic for cars and the machine, Wynn’s Aircomatic® II for ultrasonic vaporisation. Ref. Nr. 68470: machine Properties Easy to use, no supervision necessary during treatment. Ultrasonic cell vaporises the Wynn´s Airco-Clean® Ultrasonic product into small drops of < 5 micron. The vapour is blown towards the evaporator of the air- conditioning by means of a built-in ventilator. Low voltage = safe for use. The machine automatically calculates the correct treatment time (approximately 15 minutes at 22°C). Outlet tube to direct the vapour flow. Applications All air-conditioning systems of cars, trucks and buses. BrakeServe™ Wynn´s BrakeServe™ is a machine which exchanges the brake fluid in a fast and easy way at all four wheels simultaneously. Ref. Nr. 68415: machine Properties Fast and easy exchange method: one person can carry out a complete fluid exchange on a car in 15 minutes. Extremely user friendly. Provides a complete brake system fluid exchange in one application. Individual or simultaneous bleeding of all four wheel cylinders with individual colour coded toggle switches. Combination of pressure at the master cylinder and vacuum at the wheel cylinders ensures a fast and complete service. Applications For all hydraulic brake systems of cars and light trucks, conventional and ABS systems. CoolingServe™ Wynn´s CoolingServe™ is a machine, which cleans the cooling system of an engine and changes the cooling liquid in an easy and fast way. Ref. Nr. 68401: machine Properties Triple advantage over conventional cooling liquid (gravity) exchange: Easy connection in engine compartment. No tools needed. No jacking system needed. More complete cooling liquid exchange. Prevents fast fouling of new cooling liquid by old cooling liquid left behind. Up to 90 / 95 % of the cooling liquid is exchanged. No need for to de-aerate cooling system after exchange (is time saving) Applications All engines equipped with a "water" cooled system. Eco Parts Cleaner Wynn´s Eco Parts Cleaner (EPC) is a machine for thoroughly cleaning of metallic and non-metallic parts in combination with the special Wynn’s Eco-Liquid and the Wynn’s Eco-Filter, assuring a continuous recycling of the liquid. Ref. Nr. 68450: machine Properties Provides powerful and cost-effective degreasing of metallic and non-metallic parts. Ergonomic operation with foot pedal switch. Cleaning either with brush or with spray gun (supplied with the machine) or under unattended continuous flow. Applications Cleaning of all ferrous and non-ferrous metallic parts (see the technical information sheet of ECO-LIQUID W24297). Some copper alloys will more rapidly reduce the degradation by enzymes. FuelServe™ Wynn´s FuelServe™ is an independently 12 V operating apparatus which effectively cleans injection systems of petrol and diesel engines without disassembly and during engine running. Ref. Nr. 68403: machine Properties Operates without disassembly of fuel system components. Easy to connect and easy handling. Fluid delivery can be adjusted to the degree of fouling and engine displacement. Operates via the vehicle´s battery (12 V). Applications Can be connected to all petrol injection systems (K, KE, L, LE, LH, Motronic, Monojetronic, Renix, direct injection, etc.) and diesel engines (prechamber and direct injection, common rail, injection-pump unit). Power Steering Serve™ Wynn´s Power Steering Serve™ is a tool which cleans the power steering system and which replaces the fluid in the power steering system in a simple and quick way. Ref. Nr. 68413: machine Properties Removes dirt and impurities from the entire power steering system with the product Wynn´s Power Steering Flush. Uses the reservoir opening to completely flush out the old fluid and replace it with fresh. Applications Recommended when changing the power steering fluid or when experiencing problems in the power steering system. Can be used on any kind of power steering system. TranServe™ Wynn´s TranServe™ is a machine which flushes the oil system of automatic gearboxes and which changes the ATF in a simple and effective way. Ref. Nr. 68414: máchine Properties Easy connection to the transmission oil cooler lines. Cleans the oil system of automatic gearboxes with the product Wynn´s Automatic Transmission Flush. Operates on the vehicle’s battery (12V).  Applications Recommended when changing ATF of automatic gearboxes or when experiencing shifting problems. For all types of cars. Home About us Products Safety data sheets Links Contact us Sitemap