Wynn's Injection System Purge is a cleaning product to unclog dirt, varnish and carbon in fuel injectors and combustion chamber of vehicles. It has to be used with the Wynn’s FuelServe®.

Cleans injectors, valves, valve stems, combustion chamber and other vital parts in fouled petrol injection systems without dismantling.

Restores injector spray pattern.

Improves the cylinder compression ratio balance.

Frees sticking exhaust valves.

Balances fuel/air ratio.

Restores the injection time to its original value.

Restores good engine operation.

Eliminates stalling, hesitation and poor engine performance caused by a dirty fuel system.

Reduces CO and HC values in the exhaust gases in accordance with required standards.

Safe for spark plugs and all after treatment systems.

WATCH THE VIDEO

APPLICATIONS

Can be used on all fuel systems of petrol engines with carburettor, continuous, multipoint, mono-point, direct injection (GDI, FSI, ...).
Recommended treatment every 20.000 to 30.000 km or when experiencing problems of poor running, rough idling or excessive exhaust emissions.

DIRECTIONS

To be used only with the Wynn's FuelServe® equipment.
Do not add to fuel tank.
Cars: 1 litre for 1 treatment (a treatment of a passenger car averagely takes 45 – 60
minutes).
Procedure: see Wynn’s Unit Operating Manual.
Recommended treatment every 20.000 to 30.000 km (400 to 600 operating hours) or
when experiencing problems of fouled injectors, heavy black smoke, rough idling, bad
acceleration, etc.