These properties make Antislip Coating also particularly suited for bordering loading ramps and applying security indications on fork-lift trucks, movable scaffolds, cranes and other rolling stock.
Thanks to its unique chemical composition, Antislip Coating can be applied directly out of the can without previous mixing. The product being applied will always have the same homogeneous composition, as a result of which the treated surface will never show structural differences afterwards.
In many cases, Antislip Coating can be applied directly to the surface to be coated. On highly absorbent surfaces, it is recommended to pre-treat with Innotec Imprisol Project or Seal Guard. Metal surfaces should be pre-treated with Innotec Construction Primer. For a better adhesion on plastics, use Repaplast Primer.
Another important advantage is that the product can be applied on any surface (flat, curved, structure) and in any form, length or width. Antislip Coating is easy to use: depending on the size of the surface to be treated it can be applied using a nylon brush, a spatula, a filling-knife or a smoothing trowel.
The handy 1 litre tins make Antislip Coating very user-friendly and very simple in use. The special cover with patent lock ensures that the brush/spatula can be easily wiped off without the coating getting on the lock. This means that the can can be properly closed, that the product can be kept longer, and that the cover can be easily opened again.
- Viscous solution.
- Easy to spread.
- Does not string.
- Retains its elasticity.
- Quick-drying.
- Excellent adhesion.
- Simple in use, no need to mix.
- Dries at room temperature.
- Excellent water resistance.
- Very good UV resistance.
- Base: PVC compound
- Density: 1552 kg/m³
- Consistency: Thick fluid
- Solvents: Hydrocarbon mixture
- Hardness: Depending on the surface
- Temperature resistance: 80°C (after full curing)
- UV resistance: Excellent
- Water resistance: Excellent (not suitable for continuous water loads or underwater applications)
- Application conditions: +10°C to +25°C
- Type of surface: Concrete, tiles, stone, steel, aluminium and many plastics
- Surface preparation: On porous surfaces, it is recommended to pre-treat with Innotec Imprisol Project or Seal Guard. For a better adhesion on plastics, use Innotec Repaplast Primer. Metal surfaces should be pre-treated with Innotec Construction Primer.
- Application method: Directly out of the packaging using a spatula or nylon brush
- Consumption: 1 liter per m²
- Drying time: Dust dry after ± 1 hour at 20°C and 65% relative humidity.
Fully cured after ± 48 hours at 20°C, 65% relative humidity and a layer thickness of 1 to 1,5 mm. - Recommended layer thickness: 1 to 1,5 mm
- Paintability: Not recommended (painting over will reduce the slip resistance, paints and thinners can make the coating swell)
- Cleaning of materials used: With Innotec Multisol
- Cleaning of hands: With Innotec Power Scrubs or with Innotec Safe Hand Clean Plus and water
- Shelf life: 18 months in original, unopened packaging
- Storage conditions: Store cool and dry
- Type of batchcode: F
- Other details: After full curing, excellent resistance to oils, petroleum, water, detergents, diluted acids, alkalies and salts
- EAN Code: 5400563008997
- Surface preparation: On porous surfaces, it is recommended to pre-treat with Innotec Imprisol Project or Seal Guard. For a better adhesion on plastics, use Innotec Repaplast Primer. Metal surfaces should be pre-treated with Innotec Construction Primer.
- Application method: Directly out of the packaging using a spatula or nylon brush
_C.webp)
