Both modern cars and older vehicles have specific requirements, that have a chemical solution to provide the optimal engine performance and driving comfort. Modern fuel systems are highly tuned and therefore more susceptible to the negative effects of chemical reactions in the fuel.These lead to fouling of the fuel system, lack of lubrication, corrosion and other problems. Older vehicles experience problems to obtain the correct air/fuel ratio and combustion efficiency due to accumulation of deposits in the fuel system and wear on the components.

WYNN´S DASH & DISPLAY CLEANER is a water-based product especially formulated to provide an immaculate and durable finish of the vehicle dashboard and liquid crystal, plasma, etc. displays.
It is especially suitable to clean fingerprints on touchscreens.

Its exclusive additive eliminates all types of dirt and it has no incompatibilities with the materials commonly used in dashboards nowadays.

APPLICATIONS

Excellent cleaning of sensitive surfaces without scratching.
Free of ammonia, perfumes and solvents.
Removes dirt, dust, grease, footprints and nicotine and cleans thoroughly without leaving residue.
Its anti-static effect provides a surface free of dust and dirt.
Suitable for use on all types of plastic surfaces and flat and plasma screens: computers, mobiles, laptops, tablets, televisions, scanners, photocopiers, etc.
Compatible with delicate surfaces such as coated screens (e.g. anti-reflective coatings) according to our knowledge and experience. It is recommended in any case always follow the instructions given by the manufacturer of the device to be cleaned.
Biodegradable.

DIRECTIONS

INITIAL CAUTION: Always test first by applying a little product in a small restricted area to ensure the compatibility of the cleaner with the surface to be cleaned.

Cleaning the dashboard and non-delicate plastic parts:
1. Clean the dashboard or plastic surface by applying the product carefully on the surface or preferably on the cloth provided with the cleaner.
2. Let the product dry.
3. Repeat the process if persistent dirt is observed after the first cleaning.

Cleaning screens and delicate parts:
1. Turn off the monitor and make sure the surface is not hot.
2. Check that there are no abrasive particles on the surface to be cleaned, such as sand, dust, etc. that can scratch the surface.
3. Use a suitable, clean and lint-free cloth or cloth such as the one supplied with the product. Avoid the use of cloths that can be abrasive due to excessive roughness.
4. It is recommended to apply the cleaner to the microfiber cloth.
5. Never spray the product outside the intended area and ensure that it does not penetrate the internal parts of the device.
6. Clean the surface gently and without excessive pressure, until complete drying.
7. Repeat the process if persistent dirt is observed after the first cleaning.