Innoplast Protector is highly suitable for permanent protection of plastic parts such as bumpers, protective and decorative strips, handles, trim parts, frames, kitchen unit plinths, etc. as well as rubber door seals or weather strippings. Also preventive maintenance of rubbers is very important for their lifetime.
Innoplast Protector is ready to use immediately. Thanks to the special cap on the packaging the product can be accurately dosed and is therefore extremely economical. Innoplast Protector works best in combination with an Innotec Spot Handpad or a dry Innotec Multi Wipe.
- Base: Mineral oils and pure thickeners
- Density: 836 kg/m³
- Consistency: Thick fluid
- Viscosity: 806 mPa.s (at 20°C)
- Solvents: Hydrocarbons
- Flash point: > 70°C
- UV resistance: Excellent
- Water resistance: Insoluble in water
- Odour: Typical, characteristic pleasant smell
- Application conditions: +5°C to +40°C
- Type of surface: Applicable on all synthetic surfaces such as bumpers, door frames and window rubbers
- Surface preparation: The surface must be clean, dry and free of grease. The best result is obtained after cleaning with Innotec Innoplast Cleaner.
- Application method: Apply Innoplast Protector on a clean and dry Multi Wipe or Spot Handpad and rub the surface to be treated regularly. Wipe off with a clean and dry Multi Wipe.
- Cleaning of hands: With Innotec Power Scrubs or with Innotec Safe Hand Clean Plus and water
- Shelf life: 1 year in original, unopened packaging
- Storage conditions: Store cool and dry
- Type of batchcode: F
- Other details: 100% silicone free, antistatic action, does not affect rubber and paint
- EAN Code: 5400563023792
- Surface preparation: The surface must be clean, dry and free of grease. The best result is obtained after cleaning with Innotec Innoplast Cleaner.
- Application method: Apply Innoplast Protector on a clean and dry Multi Wipe or Spot Handpad and rub the surface to be treated regularly. Wipe off with a clean and dry Multi Wipe.
.webp)
