Contact Clean is indispensable upon repairing and checking electronic and electrical circuits in vehicles, machines, sound equipment, computers, etc. since many of these electronic connections are in places which are highly exposed to the action of the weather and the effects of grease, dirt and salt. Contact Clean removes oxidation, dirt and grease, thereby guaranteeing good conductivity.
Due to its unique, well-balanced composition the product does not evaporate too quickly and has a low surface tension. In contrast to many other products this allows it to penetrate deeply into the surface and to work for a long time.
Contact Clean evaporates completely and leaves no residues.
After cleaning, use Multi Spray 1000 to provide the contacts with a protective, moisture-repellent layer.
The aerosol packaging makes Contact Clean very user-friendly and easy to use. Thanks to the unbreakable nozzle with straw, even hard-to-reach places can be treated without any problem. In addition, the aerosol is equipped with a special valve that allows it to be used in any position. On this aerosol can be fixed a special brush (Aerosol Brush) to work even more locally and more intensively.
- Base: Mixture of oxygenated and aliphatic hydrocarbons
- Density: ± 760 kg/m³
- Consistency: Liquid (ready-to-use in aerosol)
- Viscosity: 3 mPa.s
- Flash point: < 0°C
- Penetration ability: Good
- Evaporation residue: None, the product will evaporate completely.
- Application conditions: +10°C to +40°C
- Type of surface: Electrical connections to a variety of surfaces. When Contact Clean might come in contact with plastic, first test on a non-visible area.
- Application method: Disconnect electronics before treatment with Contact Clean. Apply Contact Clean on the parts to be treated. Remove stubborn dirt with a brush. Spray again to remove soaked off dirt. After complete evaporation the system can be connected again; the product will evaporate completely.
- Cleaning of hands: With Innotec Power Scrubs or with Innotec Safe Hand Clean Plus and water
- Shelf life: 2 years in original, unopened packaging
- Storage conditions: Store cool and dry
- Type of batchcode: F
- EAN Code: 5400563018859
- Application method: Disconnect electronics before treatment with Contact Clean. Apply Contact Clean on the parts to be treated. Remove stubborn dirt with a brush. Spray again to remove soaked off dirt. After complete evaporation the system can be connected again; the product will evaporate completely.
.webp)
