he product forms an active foam that has a very intensive effect on dirt and can be used without problems on both horizontal and vertical surfaces. The aerosol is equipped with 2 different nozzles to guarantee an optimal application of the foam.
- Base: Glycol ethers and surfactants
- Density: ± 950 kg/m³
- Consistency: Foam
- Solvents: Glycol ethers and aliphatic hydrocarbons
- Flash point: < 0°C
- Pressure (at 20°C): 8 bar
- Tests: Registered by NSF (class A8), register number: 166029
- Application conditions: +5°C to +45°C
- Type of surface: All kinds of surfaces with carbon deposits and oil contamination
- Application method: Shake well before use. Spray Decarbonizer Foam onto the surface to be cleaned, wait until the foam has disappeared and then repeat until all contamination has loosened. If possible rinse with FS Cleaner, Power Clean or water, otherwise wipe off with a cloth. Never allow Decarbonizer Foam to dry on the surface. Do not use on glass and ceramic surfaces that are still warm.
- Cleaning of materials used: With Innotec Multisol
- Cleaning of hands: With Innotec Power Scrubs or with Innotec Safe Hand Clean Plus and water
- Shelf life: 1 year in original, unopened packaging
- Storage conditions: Store cool and dry
- Type of batchcode: F
- EAN Code: 5400563037515
- Application method: Shake well before use. Spray Decarbonizer Foam onto the surface to be cleaned, wait until the foam has disappeared and then repeat until all contamination has loosened. If possible rinse with FS Cleaner, Power Clean or water, otherwise wipe off with a cloth. Never allow Decarbonizer Foam to dry on the surface. Do not use on glass and ceramic surfaces that are still warm.
.webp)
