Special offer Free Gift with the First 100 Orders!
slide 1
Dry Lube image 1
Roll over the image to zoom
banner left image
Promotion

Free Shipping with Premium Products

Add any premium product to your basket and get free shipping for the whole order

Dry Lube

SKU:IN-03.0123-DRY-X-CL-112
£20.39 £16.99 (ex. VAT) Delayed Shipping
partners icon

Dry Lube is a fast drying and silicone free lubricant that leaves a high-quality lubricating and sliding film on the treated surface. Thanks to its unique composition, this product provides a dry and almost invisible antistatic layer, thus greatly reducing stick & slip resistance.



No more in stock
Dry Lube 500ml

This dry-film lubricant is a dispersion of colourless, waxy polytetrafluoroethylene (PTFE) that, after evaporation of the solvents, leaves an almost invisible and completely dry layer of sliding lacquer. Dry Lube can be applied to the most frequent surfaces such as ferrous and non-ferrous metals, wood, plastics, textiles, etc. This multi-purpose product is perfectly suitable for conveyer belts, dashboards, slides, machine parts etc. Moreover it is ideal to lubricate places where the attraction of dust and dirt is to be avoided in order to prevent malfunctions or accelerated wear.

Dry Lube is not sticky and does not stain, therefore it is also suitable to lubricate critical areas such as micro bearings in electronics, all hinges in car interiors or dovetail joints in fine mechanics.


  • Silicone free and antistatic.
  • Transparent, dry lubrication.
  • Extremely low coefficient of friction.
  • Reduces stick & slip resistance.
  • Corrosion resistant, waterproof.
  • Temperature resistance from -60°C to +280°C.
  • Anti-adhesive.
  • NSF registered (class H2), register number 144035.
  • Base: Fluoropolymer
  • Density: 604 kg/m³
  • Consistency: Liquid (ready-to-use in aerosol)
  • Solvents: Aliphatic hydrocarbons
  • Flash point: < 0°C
  • Temperature resistance: -60°C to +280°C
  • Water resistance: Good
  • Solvent resistance: Not resistant to solvents
  • Acid resistance: Very good. Also thoroughly tested against hydroxides such as nitric acid, hydrochloric acid, 30% potassium hydroxide, 30% sodium hydroxide.
  • Tests: Registered by NSF (class H2), register number: 144035
  • Application conditions: -15°C to +40°C
  • Type of surface: Dry Lube can be applied to the most frequent surfaces such as ferrous and non-ferrous metals, wood, plastics, textiles, etc. This multi-purpose product is perfectly suitable for conveyer belts, dashboards, slides, machine parts etc. where the attraction of dust and dirt is to be avoided.
  • Surface preparation: The surface must be clean, dry and free of dust and grease. Clean the surfaces with Innotec Multisol.
  • Application method: Shake can well during 2 minutes before use. Spray the product directly on the surface to be treated (spraying distance 15-20 cm). For best results, apply several thin layers.
  • Dust dry: After ± 5 to 10 minutes (at 20°C)
  • Cleaning of materials used: With Innotec Multisol or Innotec Power Clean
  • Cleaning of hands: With Innotec Power Scrubs or with Innotec Safe Hand Clean Plus and water
  • Shelf life: 2 years in original, unopened packaging
  • Storage conditions: Store cool and dry
  • Type of batchcode: F
  • EAN Code: 5400563015551
  • Surface preparation: The surface must be clean, dry and free of dust and grease. Clean the surfaces with Innotec Multisol.
  • Application method: Shake can well during 2 minutes before use. Spray the product directly on the surface to be treated (spraying distance 15-20 cm). For best results, apply several thin layers.

Explore our Bundles


returns icon

Easy Returns

If you decide you no longer need your item, and it is unused, you can return it within 30 days

returns icon

Fast Delivery

Place your order before 1pm Monday to Friday, and your order will be dispatched same day,