Frame Finish combines professional protection with an original OEM finish.
Frame Finish offers outstanding adhesion to old layers of lacquer and primers, as a result of which the product is very suitable for spraying or touching up chassis, vehicles, trucks, trailers, bodywork parts, agricultural machinery, containers, steel constructions, fencing, machinery, etc. Frame Finish can also be used to spray custom made items such as supports, braces and other bodywork modifications.
Frame Finish offers excellent cover and due to its fast drying is dust dry after 15 minutes.
Thanks to its aerosol packaging Frame Finish is extremely user-friendly and easy to apply. The unique combination of valve and nozzle rivals the quality of a spray gun in terms of yield and spray pattern.
- Beautiful even spray pattern and excellent cover thanks to the unique combination of valve and nozzle.
- Dust dry after 15 minutes (20°C / 65% RH).
- Tack free after 30 minutes (20°C / 65% RH).
- Completely hard after 7 days (20°C / 65% RH).
- Outstanding adhesion to old layers of lacquers and primers.
- Original OEM colour (RAL 9011) and shine.
- Very impact resistant when completely cured.
- OEM approved.
- Base: Alkyd resin and special pigments
- Density: 780 kg/m³
- Consistency: Liquid (ready-to-use in aerosol)
- Solvents: Mixture of aromatic and aliphatic solvents
- Flash point: < 0°C
- Temperature resistance: -20°C to +100°C
- UV resistance: Good
- Water resistance: Good
- Application conditions: +15°C to +35°C
- Type of surface: Metal surfaces and old intact layers of paint
- Surface preparation: The surface must be clean, dry and free of dust and grease. Sand the surface, preferably with a sanding fleece. Clean surfaces with Innotec Multisol or Innotec Seal and Bond Remover. Clean plastic surfaces with Innotec Repaplast Cleaner Antistatic and pre-treat them with Innotec Repaplast Primer.
- Application method: Shake can well during at least 2 minutes before use. Spraying distance ± 20 cm. Spray first layer thinly. Apply in 2 criss-cross layers. When applying several layers leave at least 5 minutes and no more than 4 hours for the product to evaporate between each layer. If you still want to spray a layer after 4 hours, leave the product to cure fully to prevent it burning up. After use, invert can and spray until clear to clean the nozzle.
- Dust dry: ± 15 minutes (at 20°C / 65% relative humidity)
- Curing time: ± 7 days (at 20°C / 65% relative humidity)
- Recommended layer thickness: Minimum 95µ (wet), minimum 40µ (dry)
- Cleaning of materials used: With Innotec Multisol
- Cleaning of hands: With Innotec Power Scrubs or with Innotec Safe Hand Clean Plus and water
- Shelf life: 2 years in original, unopened packaging
- Storage conditions: Store cool and dry
- Type of batchcode: F
- Other details: This paint is not suited for direct use on non-ferrous metals.
Colour: black gloss (RAL 9011)
OEM approved - EAN Code: 5400563010990
- Surface preparation: The surface must be clean, dry and free of dust and grease. Sand the surface, preferably with a sanding fleece. Clean surfaces with Innotec Multisol or Innotec Seal and Bond Remover. Clean plastic surfaces with Innotec Repaplast Cleaner Antistatic and pre-treat them with Innotec Repaplast Primer.
- Application method: Shake can well during at least 2 minutes before use. Spraying distance ± 20 cm. Spray first layer thinly. Apply in 2 criss-cross layers. When applying several layers leave at least 5 minutes and no more than 4 hours for the product to evaporate between each layer. If you still want to spray a layer after 4 hours, leave the product to cure fully to prevent it burning up. After use, invert can and spray until clear to clean the nozzle.
 duolabel.webp)
