Electrical components and cables of all kinds are often fitted in cars, trucks, boats, motorcycles, etc., as an afterthought. Because of vibrations these cables and electrical components often cause unpleasant noises. Linen Tape Exterior is sound insulating and reduces these vibrations. Therefore, the Linen Tape Exterior is a perfect product for composing and protecting cables, socket connections and cable splits, and thus preventing annoying rattles and vibrations.
Linen Tape Exterior is a tape with a smooth surface. When bundling cables with Linen Tape Exterior, a nice tight and smooth surface is created, so that water and dirt can penetrate less easily.
In addition, the product is extremely well suited to preventing the cabling from tearing on sharp parts often found in areas where the wires are placed.
Linen Tape Exterior has a layer of glue offering limited initial adhesion, as a result of which the product can be cleanly worked and will not attach too quickly to surrounding surfaces. The product will only start to adhere when pressed. Due to its slightly vulcanising effect the tape will not loosen under the influence of heat.
Linen Tape Exterior is available in the widths of 19 and 40 mm. This means it can be used immediately for most applications.
- Base: Water-repellent woven textile tape with a rubber glue layer
- Dimensions: 19 mm x 10 m
- Adhesive strength: 1,5 N/cm
- Elongation at break (%): 8-10%
- Temperature resistance: -20°C to +105°C
- UV resistance: Good
- Water resistance: Good
- Solvent resistance: Moderate
- Application conditions: +5°C to +50°C
- Type of surface: Electrical cabling, cable boom, etc.
- Surface preparation: The surface must be clean, dry and free of grease.
- Application method: Linen Tape Exterior should be applied with a constant 50% overlap.
- Cleaning of hands: With Innotec Power Scrubs or with Innotec Safe Hand Clean Plus and water
- Shelf life: 1 year in original, unopened packaging
- Storage conditions: Store cool and dry, at a temperature between +5°C and 20°C
- Type of batchcode: F
- EAN Code: 5400563035955
- Surface preparation: The surface must be clean, dry and free of grease.
- Application method: Linen Tape Exterior should be applied with a constant 50% overlap.
