It is ideal as a lubricant for locks, tools, cables, etc. but also for impregnating rubber door & window seals and canvas covers.
Multi Spray 1000 keeps rubber and plastic smooth and supple and protects plastic parts against weathering. Thanks to the product's penetrating power, even weathered plastic can be restored to its original condition. Multi Spray 1000 gives them back their natural shine.
Multi Spray 1000 cleans and protects tools, worktables, engine parts, skis, boats, weapons, machinery and copper / brass / stainless steel surfaces for prolonged periods, but is also highly suited for electric tools, control cabinets, high voltage power points, ignition systems, batteries, spark plugs and electrical connections. These are usually found in places where they are exposed to the effects of weather, dirt, grease and salt. Due to the protective action of Multi Spray 1000 corrosion can be prevented.
Multi Spray 1000 is 100% silicone free and therefore ideal for use in bodywork repair shops and spray shops or wherever paint/lacquer is being processed industrially.
All of these properties ensure that Multi Spray 1000 is extremely well suited as an all-round (light) lubricant, cleaner and protector for all activities in the workshop.
Multi Spray 1000 is available as a handy aerosol with an extra nozzle and straw making it very easy to apply in places which are difficult to access, but the product is also deliverable in 5 litre cans.
- Base: Mineral oil with various additives
- Density: 718 kg/m³
- Consistency: Liquid (ready-to-use in aerosol)
- Viscosity: 17,5 mPa.s (at 50°C)
- Flash point: < 0°C
- Pressure resistance: Minimum
- Temperature resistance: -20°C to +120°C
- Water resistance: Good against condensation, moderate against sprayed water
- Acid resistance: Good against acid steam, moderate against acid fluid
- Corrosion resistance: No rust after 1000 hours (steel plates at a relative humidity of 95%)
No rust after 50 hours salt spray vapour test, starts rusting after 100 hours - Penetration ability: Good
- Percentage of greasing agent: 25%
- Tests: Registered by NSF (class H2), register number: 153349
- Application conditions: -20°C to +40°C
- Type of surface: All ferrous and non-ferrous metals, rubbers and many plastics (except PMMA, PC, PTFE)
- Surface preparation: The surface must be clean, dry, free of grease and non-corroded.
- Application method: Shake can well before use. If using as a lubricant, spray the product directly onto the part for lubrication. If using as a plastic and rubber protector, spray the product directly on the surface (distance 15-20 cm) or apply it with a cloth or sponge. For a beautiful shine, polish the plastic with a clean, dry Multi Wipe.
- Cleaning of materials used: With Innotec Multisol or Innotec Power Clean
- Cleaning of hands: With Innotec Power Scrubs or with Innotec Safe Hand Clean Plus and water
- Shelf life: 2 years in original, unopened packaging
- Storage conditions: Store cool and dry
- Type of batchcode: F
- Other details: OEM approved
- EAN Code: 5400563016886
- Surface preparation: The surface must be clean, dry, free of grease and non-corroded.
- Application method: Shake can well before use. If using as a lubricant, spray the product directly onto the part for lubrication. If using as a plastic and rubber protector, spray the product directly on the surface (distance 15-20 cm) or apply it with a cloth or sponge. For a beautiful shine, polish the plastic with a clean, dry Multi Wipe.
.webp)
