Multiflex Coating Spray is a totally PVC-free stone chip protection that provides a perfect anti-corrosion coating and has excellent sound deadening qualities. OEM structures can be perfectly imitated.
Multiflex Coating Spray is isocyanate-free and retains its flexibility at all times. The product is also completely PVC-free, making it extremely easy to sand when dry. Multiflex Coating Spray offers perfect adhesion to bare metal and primed metal. It is extremely fast drying and after 10 minutes Mutliflex Coating Spray can be sprayed wet-on-wet using just about any type of solvent-based paint system. When using water-based paints, Multiflex Coating Spray must be completely cured.
Multiflex Coating Spray can be used for repairs to vehicles and to restore the factory original coating. On vehicles these coatings are applied to the sills, wheel arches, and other bodywork parts.
Another important property of the product is that it is resistant to solvents when fully cured.
Thanks to its aerosol packaging Mutliflex Coating Spray is extremely user-friendly and easy to apply.
- Ideal to imitate OEM structures.
- Free of PVC and isocyanates.
- Easy to apply.
- Perfect adhesion to bare metal and primed metal.
- Can be painted over after 10 minutes with most solvent-based paint systems. When using water-based paints, Multiflex Coating Spray must be completely cured and lightly sanded.
- Perfectly sandable when dry.
- Resistant to solvents when fully cured.
- Remains flexible and does not age.
- UV resistant.
- Extremely long storage life.
- Base: Mixture of rubbers, resins and fillers
- Density: ± 970 kg/m³
- Consistency: Liquid (ready-to-use in aerosol)
- Solvents: Mixture of aromatic and aliphatic solvents
- Flash point: < 0°C
- Temperature resistance: -40°C to +80°C (short-time limit +200°C)
- UV resistance: Good. Slight change in colour may appear.
- Water resistance: Good
- Solvent resistance: Good. Once dry, resistant to hydrocarbons
- Tests: Gitterschnitt: GT0a Stone chip test: 5B = 25 chips (25-49), Diameter: 1-3 mm
- Application conditions: +15°C to +30°C
- Type of surface: Bare and primed metal
- Surface preparation: The surface must be clean, dry and free of dust and grease. Sand the surface. Clean surfaces with Innotec Multisol.
- Application method: Shake can well during at least 2 minutes before use. Spraying distance ± 20 cm. Apply in even layers until the required texture is achieved. Use the special nozzle with the tube. After use, invert can and spray until clear to clean the nozzle.
- Dust dry: After ± 20 minutes (at 20°C / 65% relative humidity / 200µ layer thickness)
- Curing time: After ± 75 minutes (at 20°C / 65% relative humidity / 200µ layer thickness)
- Recommended layer thickness: 250µ (wet)
- Paintability: Can be painted over after 10 minutes with almost each solvent based paint system. When using water based paints, Multiflex Coating Spray must be completely cured and lightly sanded with an abrasive cloth (Scotch-Brite Grey) or a P320 sandpaper. Due to the huge variety of paint types on the market, it is best to test the paint beforehand.
- Cleaning of materials used: With Innotec Multisol
- Cleaning of hands: With Innotec Power Scrubs or with Innotec Safe Hand Clean Plus and water
- Shelf life: 2 years in original, unopened packaging
- Type of batchcode: F
- EAN Code: 5400563008294
- Surface preparation: The surface must be clean, dry and free of dust and grease. Sand the surface. Clean surfaces with Innotec Multisol.
- Application method: Shake can well during at least 2 minutes before use. Spraying distance ± 20 cm. Apply in even layers until the required texture is achieved. Use the special nozzle with the tube. After use, invert can and spray until clear to clean the nozzle.
.webp)
.webp)
.webp)
_LITHO.webp)
 Duolabel.webp)
