Power Clean is safe to use when cleaning electronic brake and ABS systems. Since Power Clean does not affect the surface, it is also extremely well suited to the removal of tar spots and grease or oil stains from the bodywork.
Power Clean evaporates completely without leaving any residue. Another big advantage of the product is that there is no danger of whitening aluminium parts, as is the case with most brake cleaners. This means that Power Clean can also be used to clean clutch and engine parts. The product exits the aerosol can in a very powerful spray so that difficult to access parts are very easy to clean.
Thanks to its aerosol packaging Power Clean is extremely user-friendly and easy to apply.
Power Clean is available in a 500 ml and in a very economical 750 ml aerosol can.
- Base: Aliphatic hydrocarbons
- Density: 733 kg/m³
- Consistency: Liquid (ready-to-use in aerosol)
- Viscosity: 2 mPa.s
- Solvents: Aliphatic hydrocarbons
- Flash point: < 0°C
- Evaporation residue: Maximum 4%
- Application conditions: +10°C to +30°C
- Type of surface: Nearly all types of metal, paints and plastics. Before using it on plastics and paints, always test on a non-visible area.
- Application method: Spray the product on the area to be cleaned and allow to work in for a while. Spray again to remove the dirt.
- Cleaning of hands: With Innotec Power Scrubs or with Innotec Safe Hand Clean Plus and water
- Shelf life: 2 years in original, unopened packaging
- Storage conditions: Store cool and dry
- Type of batchcode: F
- Remarks: Not suitable for printed circuit boards and other sensitive electronics
- EAN Code: 5400563019696
- Application method: Spray the product on the area to be cleaned and allow to work in for a while. Spray again to remove the dirt.
.webp)
