Repaplast Primer is a professional adhesion enhancer suitable for use on most types of plastics. Thanks to its unique formula, this product considerably enhances adhesive properties upon repairing, gluing and spraying.
Thanks to Repaplast Primer, good adhesion is achieved on difficult substrates.
Repaplast Primer is ready-for-use and thus easy to apply.
Repaplast Primer dries quickly, allowing follow-up action after a waiting time of only 10 minutes. Because of this, Repaplast Primer is the ultimate primer for any type of plastic repair.
Repaplast Primer comes in a user-friendly aerosol can with easy application.
Repaplast Primer is also part of the Repaplast Scratch Repair System and the Repaplast Plastic Repair System.
- Universal use as a plastic primer.
- Effective adhesive enhancer; suitable for use on many difficult materials.
- Ready-for-use and easy application.
- Quick evaporation.
- Perfect for use prior to further treatment.
- Base: Polymer based adhesion primer
- Density: 700 kg/m³
- Consistency: Liquid (ready-to-use in aerosol)
- Solvents: Mixture of aromatic and aliphatic solvents
- Flash point: < 0°C
- Temperature resistance: -20°C to +80°C
- Application conditions: +10°C to +30°C (max. 80% relative humidity)
- Type of surface: The most common plastics and plastic mixtures (including PP, PE, ABS, TPO, elastomer mixes, etc.) and difficult materials such as metal, stainless steel, stone, etc.
- Surface preparation: The surface must be clean, dry and free of grease. Sand down or roughen the surface depending on the subsequent treatment. Clean with Innotec Repaplast Cleaner Antistatic.
- Application method: Shake can well before use. Spraying distance ± 25 cm. Apply in one thin, even layer and allow to evaporate for at least 10 minutes. After use, invert can and spray until clear to clean the nozzle.
- Open time: 24 hours
- Drying time: ± 10 minutes (at 20°C / 65% relative humidity)
- Recommended layer thickness: A thin, even layer
- Paintability: Excellent after curing. Compatible with almost all modern priming systems and paints.
- Cleaning of materials used: With Innotec Multisol
- Cleaning of hands: With Innotec Power Scrubs or with Innotec Safe Hand Clean Plus and water
- Shelf life: 1 year in original, unopened packaging
- Storage conditions: Store cool and dry
- Type of batchcode: F
- EAN Code: 5400563006726
- Surface preparation: The surface must be clean, dry and free of grease. Sand down or roughen the surface depending on the subsequent treatment. Clean with Innotec Repaplast Cleaner Antistatic.
- Application method: Shake can well before use. Spraying distance ± 25 cm. Apply in one thin, even layer and allow to evaporate for at least 10 minutes. After use, invert can and spray until clear to clean the nozzle.
 Duolabel.webp)
