Seal and Bond Remover is suitable for all types of metal and most plastics. In addition, it is also safe to use on just about all modern types of lacquer. This means it is extremely well suited to remove stickers, emblems, protection strips and glue residues. Also the remains of glue and sealant left behind after the removal of communication equipment, glasses holders and so on, can be perfectly removed without damaging the surface.
Seal and Bond Remover is also perfectly suitable for making surfaces grease and silicone free, for example before applying new stickers, emblems, etc.
Due to its good solvent power, Seal and Bond Remover is also the ideal solution for removing tar spots, and chewing gum from clothing, for example.
The aerosol packaging makes Seal and Bond Remover very user-friendly and easy to use. Thanks to the unbreakable nozzle with straw, even hard-to-reach places can be treated without any problem. In addition, the aerosol is equipped with a special valve that allows it to be used in any position. This makes for example that emblems and protection strips can be removed very effectively by spraying Seal and Bond Remover exactly behind the part while slowly removing it.
- Base: Mixture of aliphatic and aromatic hydrocarbons
- Density: 762 kg/m³
- Consistency: Liquid (ready-to-use in aerosol)
- Viscosity: ± 2 mPa.s
- Solvents: Mixture of aliphatic and aromatic hydrocarbons
- Flash point: < 0°C
- Evaporation residue: None, the product will evaporate completely.
- Application conditions: +10C to +40°C
- Type of surface: The most common surfaces. Test first on a non visible area if necessary.
- Application method: Shake can well before use. Spray Seal and Bond Remover on the surface to be treated and allow to work in for a while. Then remove the adhesive / tar / sealant / chewing gum residue with a Multi Wipe. Wipe with a clean, dry cloth or Multi Wipe. In case of thick layers, first remove the upper layer, then repeat the treatment.
- Cleaning of hands: With Innotec Power Scrubs or with Innotec Safe Hand Clean Plus and water
- Shelf life: 2 years in original, unopened packaging
- Storage conditions: Store cool and dry
- Type of batchcode: F
- Other details: OEM approved
- EAN Code: 5400563017500
- Application method: Shake can well before use. Spray Seal and Bond Remover on the surface to be treated and allow to work in for a while. Then remove the adhesive / tar / sealant / chewing gum residue with a Multi Wipe. Wipe with a clean, dry cloth or Multi Wipe. In case of thick layers, first remove the upper layer, then repeat the treatment.
.jpeg)
