Spray Adhesive

Roll over the image to zoom

Promotion

Free Shipping with Premium Products

Add any premium product to your basket and get free shipping for the whole order

Spray Adhesive

SKU:IN-01.0108-SADH-X-X-60

£18.79 £15.66 (ex. VAT) In Stock and Available for Delivery

Download MSDS

Spray Adhesive is a modern, sprayable contact glue, for fast and efficient gluing of plastic covering, leather, rubber, foam, felt and foil to each other or to, for example, wood and metal.

Spray Adhesive is very homogenous, as a result of which it can be sprayed very evenly, without blocking the nozzle. A good bond can be achieved using only a small quantity of product. After applying the glue the parts can still be repositioned for 5 minutes, after which an extremely high adhesive power is obtained.

Thanks to its aerosol packaging Spray Adhesive is extremely user-friendly and easy to apply. Its unique adjustable flat spray nozzle allows to adjust the spray range, making the product perfectly suited to both small and very large surface areas.

No more in stock

Spray Adhesive 500ml

Base: Synthetic rubber
Density: 685 kg/m³
Consistency: Liquid (ready-to-use in aerosol)
Viscosity: ± 200 mPa.s
Solvents: Mixture of aromatic and aliphatic solvents
Flash point: < 0°C
Temperature resistance: -20°C to +90°C
Moisture resistance: Good. Not resistant to prolonged contact with water.
Solvent resistance: Moderate
Acid resistance: Resistant to weak acids
Application conditions: Minimum +15°C
Type of surface: Almost each surface such as plastic, rubber, felt, film, paper, cardboard, metal, etc.
Surface preparation: The surface must be clean, dry and free of grease. Clean the surface with Innotec Multisol. Clean plastic surfaces with Innotec Repaplast Cleaner Antistatic.
Application method: Apply a thin even covering layer of Spray Adhesive on both parts to be glued together. Allow to dry for at least 2 to 5 minutes, then join the parts and press firmly.
Consumption: ± 68 g/m²
Open time: 5 minutes
Correction time: Glued surfaces can be repositioned within 5 minutes.
Drying time: After 30 minutes (75%), final strength achieved after approx. 24 hours (100%).
Cleaning of materials used: With Innotec Multisol
Cleaning of hands: With Innotec Power Scrubs or with Innotec Safe Hand Clean Plus and water
Shelf life: 2 years in original, unopened packaging
Storage conditions: Store cool and dry
Type of batchcode: F
EAN Code: 5400563000014

Adjustable nozzle, adjustable spray range.
Adjustable insert, adjustable spray pattern.
Easy and clean application.
Semi-transparent adhesive layer.
No clumping or clogging.
Fast, effective bond.
Repositionnable within a short time (± 5 minutes).
High adhesive strength, low product consumption.

Surface preparation: The surface must be clean, dry and free of grease. Clean the surface with Innotec Multisol. Clean plastic surfaces with Innotec Repaplast Cleaner Antistatic.
Application method: Apply a thin even covering layer of Spray Adhesive on both parts to be glued together. Allow to dry for at least 2 to 5 minutes, then join the parts and press firmly.