Structure Seal Light Beige

Roll over the image to zoom

Promotion

Free Shipping with Premium Products

Add any premium product to your basket and get free shipping for the whole order

BUY 3 SAVE 10% Ships in 3-4 working days

Structure Seal Light Beige

SKU:IN-01.2440.08-STR-BEI-X-00

£27.59 £22.99 (ex. VAT) Ships in 3-4 working days

Structure Seal is a unique, permanently elastic sealant based on high quality MS polymers, specifically designed to imitate factory-original textured seams, door and flange seams. It also has excellent acoustic properties, making it particularly suitable for use in doors, roofs, and boots.

Structure Seal contains no plasticisers, solvents, isocyanates, or silicones and is shrink free. As a result, it can be sprayed over wet-on-wet after just 10 minutes.

In combination with the specially developed Easy Jet and using the special Flat Jet, Medium Jet and Wide Jet nozzles, almost any textured seam seal can be reproduced very easily and accurately. With the Flange Tip Nozzle, also smooth door seams and flanged seams can be produced very easily.

Structure Seal has a very high stability. This makes the sealant also perfectly applicable on vertical surfaces.

Thanks to the unique MS polymer composition, Structure Seal has a long shelf life even after opening.

No more in stock

Structure Seal Light Beige

Specially developed to imitate OEM robotic textured seams, smooth door seams and flanged seams.
Completely free of isocyanates, solvents, plasticisers, and silicones; non-shrink and low odour.
Very easy to use.
Permanently elastic.
After skin formation directly overpaintable with almost all modern water-based and 2-component paint systems.
Temperature range from -40°C to +90°C.
Available in the factory-original colours light beige and light grey.
Suitable for bonding body parts, metal, and many plastics.
Suitable for application between parts to be spot-welded.

Surface preparation: The surface must be clean, dry and free of grease. Clean surfaces with Innotec Inno-Degreasers, Innotec Multisol or Innotec Seal and Bond Remover. Clean plastic surfaces with Innotec Repaplast Cleaner Antistatic. Plastic, porous or extremely difficult surfaces must be pre-treated with Innotec Repaplast Primer or Innotec Seal Guard.
Application method: Apply directly from the cartridge using the Easy Jet with the corresponding nozzles (Flat Jet Nozzle, Medium Jet Nozzle, Wide Jet Nozzle, Flange Tip Nozzle)