In the automotive sector, Clear Coat is perfectly suited for spray-painting all kinds of parts such as mirror caps, body frame interiors, wings and doors, but also rear panels or pre-lacquered corners of fronts, etc. Because of its fast drying and excellent slump resistance, Clear Coat is also highly suitable to be used for finishing aluminium rims.
In the industry sector, furniture industry is one of the domains where Clear Coat can be perfectly used, for example to finish panels, doors, wall units, etc. The product also has various applications in model making.
Its fast drying and excellent slump resistance make Clear Coat particularly suitable for fast application in several layers. Thanks to its aerosol packaging this product is extremely user-friendly and easy to apply. Using the special nozzle the product can be sprayed in a very professional spray pattern.
- High-quality, clear finish ready for use.
- Quick-drying with good filling properties.
- Very good constancy.
- Provides a scratch- and wear-resistant coating of OEM quality after drying.
- Excellent resistance to weathering.
- Good UV-resistance; does not yellow.
- Provides a long-lasting shine.
- Perfect spray properties for a professional result.
- Dust dry after 5 to 10 minutes.
- Very high efficiency.
- Base: Pure acrylic resin
- Density: 792 kg/m³
- Consistency: Liquid (ready-to-use in aerosol)
- Flash point: < 0°C
- Temperature resistance: Up to 120°C
- UV resistance: Excellent (does not yellow)
- Solvent resistance: Good, in the case of brief contact and after full cure
- Application conditions: +15°C to +30°C
- Type of surface: Almost all matted old paint layers, both conventional and water-based base coats, metal, non-ferrous metal and most plastics
- Surface preparation: The surface must be clean, dry and free of dust and grease. Clean the surface with Innotec Multisol. Clean plastic surfaces with Innotec Repaplast Cleaner Antistatic, then pre-treat them with Innotec Repaplast Primer.
- Application method: Shake can well during 2 minutes before use. Spraying distance 25-30 cm. First apply 1 thin layer, then 2 smooth criss-cross layers. Leave 5 minutes for the product to evaporate between two layers. After use, invert can and spray until clear to clean the nozzle.
- Dust dry: After ± 5 to 10 minutes (at 20°C / 65% relative humidity)
- Curing time: After 2 hours at 20°C / 65% relative humidity and depending on the layer thickness
- Recommended layer thickness: First 1 thin layer, then 2 smooth criss-cross layers
- Sandability: Excellent after ± 1 hour
- Paintability: After full curing. Test beforehand on a non-visible area.
- Cleaning of materials used: With Innotec Multisol
- Cleaning of hands: With Innotec Power Scrubs or with Innotec Safe Hand Clean Plus and water
- Shelf life: 2 years in original, unopened packaging
- Type of batchcode: F
- Other details: The unique nozzle-riser combination enables the same quality result as achieved from a professional gravity feed gun.
- EAN Code: 5400563011102
- Surface preparation: The surface must be clean, dry and free of dust and grease. Clean the surface with Innotec Multisol. Clean plastic surfaces with Innotec Repaplast Cleaner Antistatic, then pre-treat them with Innotec Repaplast Primer.
- Application method: Shake can well during 2 minutes before use. Spraying distance 25-30 cm. First apply 1 thin layer, then 2 smooth criss-cross layers. Leave 5 minutes for the product to evaporate between two layers. After use, invert can and spray until clear to clean the nozzle.
.webp)
_LITHO.webp)
 Duolabel.webp)
 Duolabel.webp)
