Fine-Tef Oil forms a durable lubricant film with good preservative properties, reducing wear to an absolute minimum. The high-quality PTFE additives ensure that the lubricating properties are almost the same and effective both at very low and at high temperatures. Having a very good resistance to moisture and water, the product also lubricates effectively at higher rinsing water temperatures (e.g. during cleaning).
As Fine-Tef Oil leaves a waxy lubricating surface which is tack-free, it can be used perfectly in critical areas such as for micro-bearings / guides in electronics as well as all hinges used in car interiors. But also in mechanics and precision mechanics, there are countless applications with chains, cables / guides, hinges, conveyor belts and ball joints where the unique Fine-Tef properties offer many advantages.
The aerosol packaging makes Fine-Tef Oil very user-friendly and easy to use. Thanks to the unbreakable nozzle with straw, even hard-to-reach places can be treated without any problem. In addition, the aerosol is equipped with a special valve that allows it to be used in any position.
- Base: Mixture of synthetic and mineral oils, PTFE and additives
- Density: 686 kg/m³
- Consistency: Thin liquid (ready-to-use in aerosol)
- Flash point: < 0°C
- Temperature resistance: -50°C to +200°C (peak load up to 250°C)
- Water resistance: Very good
- Saltwater resistance: Good
- Acid resistance: Good
- Corrosion resistance: Excellent (contains anticorrosive additives)
- Tests: Registered by NSF (class H1), register number: 158390
- Application conditions: +10°C to +40°C
- Type of surface: Almost all kinds of surfaces
- Surface preparation: The surface must be clean, dry, free of grease and non-corroded. Clean surfaces with Innotec Multisol, Innotec Ultra Clean or Innotec Power Clean.
- Application method: Shake well before use. Spray directly onto the parts to be lubricated (spraying distance 15-25 cm) and leave a short time to evaporate before loading.
- Cleaning of materials used: With Innotec Multisol or Innotec Power Clean
- Cleaning of hands: With Innotec Power Scrubs or with Innotec Safe Hand Clean Plus and water
- Shelf life: 2 years in original, unopened packaging
- Storage conditions: Store cool and dry
- Type of batchcode: F
- EAN Code: 5400563035856
- Surface preparation: The surface must be clean, dry, free of grease and non-corroded. Clean surfaces with Innotec Multisol, Innotec Ultra Clean or Innotec Power Clean.
- Application method: Shake well before use. Spray directly onto the parts to be lubricated (spraying distance 15-25 cm) and leave a short time to evaporate before loading.
 duolabel NSF.webp)
.webp)
