Thanks to its unique formula, Topfix offers extremely strong gluing results. Topfix is also flexible to a certain extent, which allows the product to be used for a variety of applications. When combining the use of Topfix with Repaplast Primer, you will get a unique combination of products which can even be used on the most difficult surfaces such as recycled plastic, natural stone, metal, stainless steel and PMMA.Thanks to its unique properties, Topfix makes it possible to glue objects that were impossible to glue before. It also allows you to repair parts, which you would normally throw out. Topfix is also perfect for a wide range of emergency repairs.Topfix offers great firm results and has an extended spray clean interval. This makes it perfectly suitable for vertical glue joints that cannot be glued or modelled in one go.Topfix is very user-friendly and can be dosed very accurately thanks to the handy dual cartridge and the use of the Mixer Gun. The special mixer nozzle ensures the right mixture proportions and prevents the remaining product from hardening in the cartridge. This means that an opened cartridge of Topfix can still be kept for a long time.
The kit includes:
Top fix two part plastic adhesive
Repaplast applicator gun
Replaplast mixer nozzle 20 pack
Click here for Instructions
- Surface preparation: The surface must be clean, dry and free of grease. Clean surfaces with Innotec Repaplast Cleaner Antistatic. In case of (recycled) plastic or surfaces that are difficult to treat such as stainless steel for example, we recommend the use of Innotec Repaplast Primer.
- Application method: Because Topfix dries so quickly, set out all the tools you will need before starting the repair or gluing. Fix the mixer nozzle to the double cartridge. When using a new cartridge for the first time, always squeeze out and discard the first two centimetres, to guarantee an optimal mix of the Topfix. After use, do not remove the mixer nozzle; exchange it the next time you want to use the product. Gather up the parts to be glued and roughen or sand the contact surfaces. Clean the parts using Innotec Repaplast Cleaner Antistatic. If necessary, pre-treat with Innotec Repaplast Primer. Use the mixer nozzle to spread the Topfix on the surface and join the parts to be glued together as quickly as possible, within 10 seconds. Keep the repair area fixed for a short time until the Topfix has strengthened sufficiently. The repaired part can be treated again after 10 minutes. This includes milling, drilling, tapping, etc.
_C.webp)
_booklet NSF.webp)
