Black Body-Paint can also be used to spray the types of supports and braces that are often made to measure.
Due to its fast drying Black Body-Paint extremely well suited to application in several layers. Its good sandability makes it perfect for use as a control paint.
Thanks to its aerosol packaging Black Body-Paint is extremely user-friendly and easy to apply. Using the special nozzle the product can be sprayed in a very professional spray pattern.
- Very nice OEM mat black colour.
- Easy to spray.
- Suitable for fast application in several layers.
- Chip proof and impact resistant.
- Excellent resistance to weathering.
- Base: Cellulose
- Density: 773 kg/m³
- Consistency: Liquid (ready-to-use in aerosol)
- Solvents: Mixture of aromatic and aliphatic solvents
- Flash point: < 0°C
- Temperature resistance: -20°C to +125°C
- UV resistance: Good
- Water resistance: Excellent
- Application conditions: +15°C to +25°C (65% relative humidity)
- Type of surface: Almost all modern plastics and metals. Not suitable for plastics containing styrene.
- Surface preparation: The surface must be clean, dry and free of dust and grease. Sand the surface, preferably with a sanding fleece. Clean metal surfaces with Innotec Multisol or Innotec Seal and Bond Remover. Clean plastic surfaces with Innotec Repaplast Cleaner Antistatic and treat with Innotec Repaplast Primer.
- Application method: Shake spray can well before use. Spraying distance ± 20 cm. Apply in a criss-cross layer. When applying several layers leave 10 minutes for the product to evaporate between each layer. After use, invert can and spray until clear to clean the nozzle.
- Dust dry: ± 10 minutes (at 20°C / 65% relative humidity)
- Curing time: 2 hours (at 20°C / 65% relative humidity)
- Recommended layer thickness: ± 85µ (wet), ± 20µ (dry)
- Cleaning of materials used: With Innotec Multisol
- Cleaning of hands: With Innotec Power Scrubs or with Innotec Safe Hand Clean Plus and water
- Shelf life: 2 years in original, unopened packaging
- Storage conditions: Store cool and dry
- Type of batchcode: F
- Other details: If Black Body-Paint is used as a control layer when sanding, a drying time of 2-3 minutes will be sufficient.
- EAN Code: 5400563010860
- Surface preparation: The surface must be clean, dry and free of dust and grease. Sand the surface, preferably with a sanding fleece. Clean metal surfaces with Innotec Multisol or Innotec Seal and Bond Remover. Clean plastic surfaces with Innotec Repaplast Cleaner Antistatic and treat with Innotec Repaplast Primer.
- Application method: Shake spray can well before use. Spraying distance ± 20 cm. Apply in a criss-cross layer. When applying several layers leave 10 minutes for the product to evaporate between each layer. After use, invert can and spray until clear to clean the nozzle.
 duolabel.webp)
_LITHO.webp)
 Duolabel.webp)
 Duolabel.webp)
 duolabel.webp)
